How to Log in to Your Router Using the Default IP Address

Logging in to router’s admin panel

In order to secure your wireless network, you should change the default username and password for your router. To do this, go to your router’s admin panel and click on the ‘Change Password’ option. You will then be prompted to enter your current password and a new one. Be careful not to reuse the same password on different routers. You should also change your password to something that is easy to remember, yet complex enough that hackers cannot guess it. Another good idea is to create a passphrase that uses a simple word or phrase.

First, you need to log in to your router. You can find your router’s default credentials in the user manual, on the label attached to your device, or online. Most routers use a default username and password that you should change.

Enabling/disabling automatic login via IP address

You can enable or disable automatic login via IP address in the Accounts feature. By default, this feature is disabled. To enable this feature, you must be a superuser. To enable it, click the switch labeled “ON” and then click the checkbox next to the “Automatic login via IP address” field.

To disable automatic login through IP address, go to the Security page of your account. Click the “IP Login Rate Limit.” You can also disable the IP login rate limit to prevent logged-in users from automatically logging in. This feature only works on the Pro version of BranchCMS.

Creating an allow-list

To create an IP allowlist, visit the Company settings page and go to the IP Allowlist field. The default value is, which indicates that the user’s IP address is not allowed to login. You can edit the current IP address by clicking on it, or you can enter an entire CIDR block in the 192.168.o.1  field. Once you’ve edited the IP address, click “Save” to apply the changes.

Next, go to Account>Settings>IP Access Control. In this screen, you’ll see two options: an Allow-list that only allows access from certain IP addresses, and a Deny list, which allows access from any IP address. In the Allow-list, you enter a list of known IP addresses, and you can enter up to 200 IP addresses as a single range. You can also use a combination of both.

Default router IP address

The default router IP address is the address you enter to log in to your router to access its settings. This address is usually found on the bottom of your router hardware. It is also possible to find it in your router’s manual. You can also get this IP address from your internet service provider if you have one. In this tutorial, we’ll show you how to find it and how to log in to your router using the default IP address.

Windows users can get the IP address of their router by going to the Control Panel and clicking on the Network and Internet category. Click on the “View network status and tasks” link. In the Network and Sharing Center, look for the Ethernet Status window and click on the details button. Mac users can do the same thing by going to the Apple menu and selecting System Preferences.